蔡司CALENO

多测头三坐标测量机

搭载高性能光学测头和接触式测头的蔡司CALENO悬臂三坐标可确保高测量效率和精度

它不仅是机器人。它是Hambot。

Hambot是测量学中的新一代悬臂式机器,它将机器人的高性能与传统悬臂式机器结合在一起。

ZEISS CALENO结合了坐标测量机的精度、协作系统以及带有自动模具更换装置的出色多测头系统。多功能性和极高的性能确保了在测量室和生产线附近实现更高的运行速度、加速度和精度。

ZEISS CALENO 系列中的 EagleEye 光学系统可将测量时间缩短 85%,而不会影响质量或精度。

*基于特征测量的基准。在配备EagleEye系统的ZEISS PRO双臂上,可对整体进行450个特征测量。

生产率和精度

多功能性和极高的性能确保了在测量室和生产线附近实现更高的运行速度、加速度和精度。

设计原理升级

ZEISS CALENO可以根据客户需求通过各种选项和组合轻松升级。可以对其进行定制和完整配置,以满足特定的效率和性能要求。

安全理念

操作员和测量系统受到多层安全系统的保护。摩擦传动将限制功率。万一发生碰撞,所有轴的过电流保护以及Y臂的开关导轨将立即停止系统。

全外罩

每台机器装配全新设计的全外罩,确保对机器的隔温和隔湿保护。

ZEISS CALENO cover full enclosure detail shown in cross section

ZEISS CALENO Designs

ZEISS CALENO flush floor ZEISS CARFIT eMOBEE automotive production measuring room

Flush floor installation

In the flush floor version, ZEISS CALNEO is optimally accessible and can be driven over with floor conveyors such as ZEISS eMOBEE. For all work on and with the measuring system, the floor-level version offers the best possible ergonomics and productivity - ideal for a high volume of measurements and tight time windows. A suitable foundation is required for installation.

ZEISS CALENO flush floor duplex and single arm system
ZEISS CALENO flush floor as duplex and as single arm system

ZEISS CALENO T tabletop design

The ZEISS CALENO T tabletop design generally requires no work on the foundation and is less expensive than the floor-level version - with the same outstanding precision and performance. With the tabletop design, the measuring table and measuring columns form an inherently rigid unit. This makes the measuring system less sensitive to the installation site. For this reason, ZEISS CALENEO T is ideally suited for subsequent installation and near the production line. With an optionally available air damping system, the system can also be decoupled from the foundation in the best possible way.

ZEISS CALENO T tabletop duplex and single arm system
ZEISS CALENO T as duplex and as single arm system

Floor-mounted installation

To meet special requirements, the floor-level design of the ZEISS CALENO can also be installed on the floor.

ZEISS CALENO floor mounted duplex and single arm system
ZEISS CALENO floor mounted as duplex and as single arm system

Upgrade from ZEISS PRO T

You would like to upgrade the sensor technology of your ZEISS PRO T? We recommend a complete upgrade to ZEISS CALENO T.

The new ZEISS CALENO T has been designed so that its improved Z-columns are compatible with the ZEISS PRO T measuring plate. By exchanging the column, a ZEISS PRO T can be converted to a ZEISS CALENO T with the latest ZEISS sensor technology. This gives you the most accurate and efficient ZEISS horizontal arm measuring system ever. The reason: the new Z-columns of the CALENO T provide higher rigidity, first-class temperature isolation as standard and minimized maintenance. And they are the future-proof basis for future further developments in swivel joints and sensor technology.

Upgrade ZEISS Pro T CALENO T columns exchange

全新无级测座DSC

具备高动态性能和高精度的DSC可胜任各种测量任务,可搭载光学和接触式测头,支持长达800mm的接长杆,并具有高转动速度。被动式的测针自动更换架无需气源和电源。

蔡司CALENO技术参数

ZEISS CALENO flush floor

ZEISS CALENO T

量程可达(X方向可定制)

 

X [mm]

Y [mm]

Z [mm]

单臂

7000

1800

3000

双臂

7000

3086

3000

Length measurement error

 

Temperature

 E in μm

Standard

16°C –24°C

27 + L /80 ≤70

Option High Accuracy

18°C –22°C

18 + L/125 ≤50

Maximum Speed and Acceleration

 

V spacial

A spacial

Standard

260 mm/s

1000 mm/s2

Option Performance with light barrier

866 mm/s

1500 mm/s2

Measuring volume up to

 

X [mm]

Y [mm]

Z [mm]

Single

7250

1800

2500

Duplex

7000

2800

2500

长度测量误差

 

温度

测量误差单位μm

标准

16°C –24°C

27 + L /80 ≤70

高精度选项

16°C –24°C
18°C –22°C

27 + L /100 ≤60
27 + L /125 ≤50

最大运行速度和加速度

 

测量室运行速度

测量室运行加速度

标准

260 mm/s

1000 mm/s⊃2;

高性能选项

866 mm/s

1500 mm/s⊃2;

Watch the Rock 1 show

下载资料

ZEISS CALENO Brochure EN

ZEISS CALENO Brochure EN
页: 20
文件大小: 1796 kB